S - type single - stage double - suction level in the open centrifugal pump. The pump inlet and outlet are below the pump shaft centerline, maintenance, as long as the pump cover opened, you can remove all the parts for maintenance.
As general machinery and equipment and widely used in various fields of the national economy. As the corrosion, corrosion, erosion and cavitation erosion and other damage, so that the pump casing and pump wheel surface becomes uneven, friction coefficient gradually increased, the pump efficiency decreases, power consumption increases, shorten the service life of the pump. The use of the United States Ka Wah polymer composite pump coating material, improve pump impeller, pump shell surface finish, improve operating efficiency, improve water pump conditions; reduce friction loss; repair cavitation cavitation, to avoid vortex or backflow, Improve the efficiency of the pump.
The pump inlet and outlet are in the pump below the axis of the axis, with the axis perpendicular to the horizontal direction. Maintenance without removing the import and export of water pipes and motors. View from the transmission direction, the clockwise rotation of the pump (according to user needs can also be changed to counter-clockwise rotation).
Pump main parts are: pump, pump cover, impeller, shaft, double suction seal ring, sleeve and so on.
Pump and pump cover constitute the impeller of the studio. In the inlet and outlet flanges, the installation of a vacuum gauge and pressure gauge pipe screw hole. Out of the lower part of the water flange, the system has a water pipe hole.
The impeller, which has undergone a static balance check, is secured to the shaft by means of a bushing and a bushing nut on both sides. The axial position of the impeller can be adjusted by the sleeve nut.
The pump shaft is supported by two single row radial ball bearings. Bearing installed in the bearing body, installed in the pump at both ends, lubricated with butter.
Double suction seal ring to reduce water pump pressure chamber water leakage back to the suction chamber.
Pump through the flexible coupling directly from the motor drive, if necessary, can also use internal combustion engine drive.
Shaft seal for the soft packing seal (according to user needs can be mechanical seal structure).
1. Compact structure Beautiful appearance, good stability, easy to install.
2. Smooth optimization of the design of the double-suction impeller to minimize the axial force, and has excellent hydraulic performance of the leaf type, and by precision casting, the pump housing surface and impeller surface is extremely Guanghua has a significant anti-cavitation performance And high efficiency.
3. Bearings use SKF and NSK bearings to ensure smooth operation, low noise, long service life.
4. BURGMANN mechanical seal or packing seal. To ensure that 8000 hours of operation without leakage.
5. Installation form Assembly without adjustment, according to field conditions. Discrete or horizontal installation.
6. The installation of self-priming device, can achieve automatic water absorption, that is no need to install the bottom valve, no vacuum pump, no backwash, the pump can start.
Transmission of liquid types: all kinds of clean water and light corrosion liquid;
Pump chamber pressure: ≤ 4.0MPa.
Looking for ideal S Water Pump Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the S Centrifugal Water Pump are quality guaranteed. We are China Origin Factory of High Pressure Water Pump. If you have any question, please feel free to contact us.
Product Categories : Other Submersible Well Pump