Home > Products > QJ Type Submersible Well Pump > 250QJ Vertical Multistage Centrifugal Water Pump

250QJ Vertical Multistage Centrifugal Water Pump

    Payment Type: T/T,Money Gram
    Incoterm: FOB
    Min. Order: 1 Bag/Bags
    Delivery Time: 15 Days
Basic Info

Model No.250QJ


Working PressureHigh Pressure Pump

Influent Type of ImpellerSingle Suction Pump

Position of Pump ShaftVertical Pump

Pump Casing CombinedVerticaljoint Surface Pump

Mounting HeightSince Irrigation Centrifugal Pumps



TheoryCentrifugal Pump

PressureHigh Pressure

Place Of OriginShaanxi, China (Mainland)

Brand NameFu Long

StructureGear Pump


Model Number250QJ

Additional Info



Place of OriginShaanxi province china


Payment TypeT/T,Money Gram


Delivery Time15 Days

Product Description

250QJ-type well submersible pump is a complete set of tools for extracting groundwater from deep wells. It is widely used in farmland irrigation, water supply and drainage of industrial and mining enterprises, and livestock water in plateau and mountainous areas. QJR well with hot water submersible pump, using a special material and structure for the extraction of underground hot water. In addition the company according to user needs to produce seawater, mining and other special occasions with submersible pumps. The pump host consists of QJ submersible pump and YQS submersible pump. Submerged underwater work, with a compact structure, small size, light weight, installation, use, easy maintenance, safe and reliable transportation, energy conservation and other advantages.

Pump Part: At the top of submersible motor pump,the centrifugal pump is connected with motor by rigid shaft coupling.The bearing is water lubricated.The backpressure valve is fixed on the top of the pump to avoid the working parts being damaged by the returned water in pump when the submersible motor pump stops.The water in pump can flow away through the drainage hole in the valve in case the pump is broken in winter.(Note:There is no backpressure valve in low head submersible motor pump).

Motor Part: At the bottom of submersible motor pump,closed water-filled structure,guiding bearing and thrust bearing use water lubricated material.The compensation diaphragm is fixed on the bottom of motor to adjust the differential pressure caused by the ring temperature of motor.The sand-proof structure is fixed on the top of motor to prevent mud and sands to enter inside of motor.

250QJ Submersible Water Pump

Structural features:
QJ submersible pump consists of multi-stage centrifugal impeller in series. The pump stage is connected by a flat rib or bolts, each of which is supported by a rubber (or copper) bearing, with no check valve at the top of the pump. YQS submersible motor is a closed water-filled three-phase asynchronous motor, the winding is made of water-resistant continuous sealing structure. Both the bearing and the thrust bearing are water lubricated bearings. The upper part of the motor is equipped with sand control mechanism to prevent the sediment from entering the motor internal control.

Working conditions:

1. 380V (deviation≤5%), 50Hz (deviation≤1%), 3 phases

2.Electric motor must be full of clean water

3.The first piece of impeller of pump should be at least 2m or more below dynamic water level. The distance from Pump to static water level should be not more than 70m. The distance from motor base to well bottom should be not less than 3m.

4.Water temperature should be not more than 20℃

5.Sand content of water (based on mass of sand) should be not more than 0.01%

6.PH should be 6.5-8.5

7.The content of hydrogen sulfide in water should be not more than 1.5mg/l

8.The content of chloride ions should be not more than 400mg/l

9.Water yield of water source should satisfy the demand of pump running.

175QJ Submersible Pump Model Description:

250QJ 40-22

250- the overall diameter of the pump, that is, the diameter of the wells can not be less than 150mm;

QJ - well submersible pump

40 - Pump design point flow

22- pump design point head


1.100% copper rewindable wire
2.High efficiency
3.Fast delivery time
4.Dry run pretection

The Choice of Submersible Motor Pump:
The followig content should be understood in order to choose and operate submersible motor pump correctly:
1 Understanding all clauses mentioned in operation conditions
2 Pay attention to the diameter and the depth of well
3 Pay attention to the static water level and the flowing water level of well
4 Pay attention to the water surging capacity of the well
The capacity,head,and the diameter of full set should be shosen according to the water surging capacity,the depth and the diameter of well.The water surging capacity of well should meet the requirement of the capacity of submersible motor pump,so that the submersible motor pump can be under the water totally when it works.

Looking for ideal 250QJ Series Submersible Water Pump Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the 250QJ Multistage Centrifugal Water Pump are quality guaranteed. We are China Origin Factory of 250QJ Centrifugal Submersible Water Pump. If you have any question, please feel free to contact us.

Product Categories : QJ Type Submersible Well Pump

Email to this supplier
  • *Subject:
  • *Messages:
    Your message must be between 20-8000 characters
Communicate with Supplier?Supplier
liuaiyun Ms. liuaiyun
What can I do for you?
Contact Supplier